2021 Latest Design Mesh Kitts For Solar Panels - Stainless Steel Solar Panel mesh with Nylon Clips – Tengfei

Stainless Steel Solar Panel mesh kits with 60 Nylon Clips
Keep birds and vermin out from under your solar panels

Pest Control Solar Panel mesh is specifically designed for solar panel bird proofing to keep pest birds and vermin out from under solar panels.
Solar panel protection mesh forms a physical barrier that is far more effective than bird spikes and other bird repellents. Other bird deterrents are often ineffective and do not stop birds from roosting. They often bring diseases such as salmonella and interfere with electrical wiring on the underside of the panels.
Without bird control, mesh nesting materials often build up under solar panels as solar panels form an ideal nesting location for many bird species. Solar Panel Bird protection is a cost-effective means of protecting your investment.
Tengfei Solar Panel Mesh use special fasteners that do not affect your solar arrays panel warranty. We offer two types of solar panel clips – an aluminium clip and a UV stable nylon clips. Our Nylon clips are UV stabilized for Different Countries.

Advantages of Product:
1: Fast and easy to install, no gluing or drilling necessary.
2: It does not void warranties and can be removed for servicing.
3: Non-invasive installation method that neither pierces the solar panel nor the roof covering
4: It is better than using spikes or repellent gels,100% effective when properly installed
5: long-lasting, durable, non-corrosive
6: Reduce the cleaning and maintenance requirements for solar panels
7: It is specifically designed and intended for use in excluding all species of birds from roosting

Aluminum Solar Panel Clips and Mesh Kit Installation Guide
● Place provided clips with every 30-40cm along the underneath of the solar panel frame and pull tight.
● Roll out the solar panel mesh and cut into manageable 2metre lengths for easier handling. Position the mesh in place, making sure the fastening rod points upwards so it keeps a downward pressure on the mesh to create a firm barrier to the roof. Allow the bottom to flare out and curve along the roof, this will ensure rodents and birds cannot access under the mesh.
● Attach the fastening washer and push firmly to the end to tightly secure the mesh.
● When joining the next section of mesh, overlay approximately 10cm and join the 2 pieces with cable ties to create a complete barrier.
● For outer corners; cut upwards from the bottom until the bend point. Cut a section of mesh to cover any gaps using cable ties to fix the corner piece in place.
● For inner corners: cut the mesh upwards from the bottom until the bend point, secure any overlay sections together using cable ties.